C-GA FUEL DISPENSER

C-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose: 4.5m

Weight : 255kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

imbedded and exported from concrete base, filling in pipes hole with sand in case of diffusion of vapor. Delivery pipe in concrete should be a little higher, connected with corrugated pipe through flange and oil-resistant gasket. (See Diagram 5-2) Installation of pipeline and tank 3.1 The set of design of tank and pipeline should be conducted by locale design agency that has acquired ratification of public safety and firefight department with qualified capacity. In order to ensure system safety, filling station should not self –design pipeline of delivery oil. Diagram 5-3 is a pipeline installation sketch map of fuel dispensers and hydraulic system, which is provided for reference. The design and construction of filling station should fuel dispenser conduct in accordance with the relevant stipulation of national standard GB 50156-2002 The Design and constr fuel dispenser uction regulations of vehicle LP-Gas Station. Diagram 5-2: Connection chart of inlet pipe and corrugated pipe 3.2 Pipeline between fuel dispensers and tank should be slant to tank. In hot whether pipeline slope regulated as 0.2% in GB50156 is easy to generate cavitation. Foreign fuel dispenser factories regulate larger slant such as Gilbarco 10ft (about 1.67%), Wayne 1:48 (2%). Thereby, it is suggested that the slant should be in scope of 1.5~~~ 2%. Diagram 5-3 Pipeline installation sketch map 3.3 Gasoline and diesel oil tank should be burred in earth under ground at least 0.5m , prohibiting in indoor or basement. Tank should not be burred in the ear fuel dispenser th in which includes coal residue or chemicals, and surrounded by non-erosive material such as sand or thin earth, thickness no less than 0.3m. 3.4 The level distance between fuel dispenser and tank should be 20m or more as long oil could be suck without any leakage. The vertical distance between the inlet of fuel dispense and the nadir of oil level should not exceed 4m. The diameter of pipe between fuel dispenser and tank is 38m (1 1/2’�, which keeps clean with few elbows. The connection of delivery pipes

e change is send as an unsolicited data array　　 FP_Status_Message .　　 SUSPEND_FP The FP receives a suspend command for whatever reason and the FP moves into　　 the SUSPENDED STARTED state.　　 Action: The FP receives the Suspend_FP command.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 Action : The FP sends an unsolicited data array FP_Error_Type_Mess　　 with the minor error Suspended_ Fuelling to the CD and the　　 error is sto fuel dispenser red within TR_Error_Code　　FP31_2.21 IFSF - STANDARD FORECOURT PROTOCOL fuel dispenser June 2005　　 DISPENSER APPLICATION　　Page: 42　　 NO-PROGRESS This event occurs when a FP is released and a valid logical nozzle is selected but no　　 volume pulses are registered within a defined period of time (configured by the　　 contents of the data element Max_Time_WO_Prog). The FP moves to the　　 SUSPENDED STARTED state.　　 PCD Comment:　　 If the proprietary pump protocol doesnt indicate that volume pulses have been　　 generated the PCD will have to ignore this event.　　 fuel dispenser Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 Action : The FP sends an unsolicited data array　　 (FP_Error_Type_Mess) with minor error No_Progress to the　　 CD and the error is stored within TR_Error_Code.　　 TERMINATE_FP The FP is force

f a strong vote against the outgoing government. So it is no surprise that voters are miffed when they then find themselves being fed a diet of economic dislocation, greater inequality and cuts in public services, accompanied with claims that it is for their own good. In Mr Dzurinda s case, his first term stemmed from public revulsion against the scandals and menacing behaviour of the Meciar regime. The first, broadly based coalition was sensible rather than radical. And Mr Dzurinda s own conservative party was far from being the most popular part of it. His re-election in 2002 was a fluke. Two minor parties of left and right failed to reach the threshold necessary to get into parliament. And his main rival, the populist ex-commun fuel dispenser ists of “Smer�(Direction) did surprisingly badly. That allowed Mr Dzurinda to cobble together a new coalit fuel dispenser ion, including other right-of-centre parties and a grouping representing the Hungarian minority. It too was unwieldy, but hung together enough for Mr Dzurinda, and his main ally, the brainy finance minister, Ivan Miklos, to get reform through. Sadly, even successful reforms do not create much political support. Most of Mr Dzurinda s changes are now popular (only Smer is pledged, in theory at least, to cancel them). But post-communist voters have short memories and short fuses. They compare their lot not with the travails of the past, but with the secure and comfortable lives they see in old Europe. The biggest reason for reformers losing popularity fuel dispenser is that economics is only part of the story. The biggest failing among all the former captive nations has been in reform of state administration. Corrupt and incompetent officials, venal politicians, slow, expensive and untrustworthy courts, silly rules and a feeling of public powerlessness all combine to make voters feel fed up. On this front, Slovakia (like almost all ex-communist countries) has made little progress. Still, Mr Dzurinda can be pleased. Reformers lose—but so does almost every incumbent.