POPPUMP Namibia Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Namibia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GC88 FUEL DISPENSER

D-GC88

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

products links

links

technical archives

    . Presetting refuel and non-presetting refuel Fuel dispenser’s hose is full of oil in non-presetting refueling progress. Due to the function of solenoid valve in presetting refuel progress, hose is not full as that of non-presetting. Only one refuel mode is adapted in appraisal progress because fuel dispenser hose cubage directly affect accuracy of fuel dispenser. Oil Volatility The working media of fuel dispenser always is volatile, vehicle gasoline in particular. Oil volatilization inevitably affect the appraisal result, therefore, it is prohibited to conduct test in large wind or high temperature whether. Chapter VII Failure and Troubleshooting Like any other machinery, fuel dispenser unavoidably appears failure during long t fuel dispenser ime of operation. it is not a simple thing in maintenance progress as judge the trouble part or reason. Since fuel dispenser is composed of varied mechanical, electronic and hydraulic components, a failure maybe caused by diverse reasons or a same reason result in different trouble. In addition, fuel dispenser operates with other exterior devices --- outside power network, tank, delivery pipeline, etc, which also generating abnormal working -- rather than independently. Therefore, fuel dispenser’s functional failure is just phenomenon, mechanical failure is root reason. Only know working principle and structure firstly, can repairer correctly judge failure reason and solve trouble. In order to do that the academic knowledge is needed to support, to learn the relation between causation and phenomenon, and ceaselessly summarize practical experience. In short, as for fuel dispenser’s failure, preventive guideline and strict safety operation regulation, should be c fuel dispenser arried out, enforcing regulative maintenance and inspection, getting rid of trouble within burgeon state. Owing to various models and structure in domestic fuel dispense market, specific type should be maintained in accordance with the User’s Manual, the handbook only presents the common failure and troubleshooting of genera

technical specification

    ates the transaction for all  required information. The CGD stores the data for the code until it runs out of memory. On a software device where memory is  virtually unlimited this is unlikely but on hardware implementations this occurrence is handled as determined by the configuration.  When fuel dispenser a customer enters the code using a CED to receive the service the CD sends a request to the CGD to check the data for the  particular code. The CGD responds with a transaction number from which the code data can be read or the code related data itself.  Once the CD has validated that the service should be provided it then enables the service to the customer. After the service has  been provided to the customer the CD should fuel dispenser then send a request to use the code number. The CD should send the code. The CGD  will respond with a new transaction number. If desired the CD can then interrogate the new transaction to insure that the code has  been used. If the transaction database is not being used the Code is marked as used as soon as the service delivery commences.  Since the CGD does not have access to current dating information all of the time it cannot on a daily basis expire old codes. It is  logical that the CGD will expire codes when it receives a request from a CD.  It should be noted that in Version 1.10 there is now a specific data table that allows the CD to directly access the code information.  In version 1.00 all access was via a transaction. This indirect access to the database has been removed to simplify implementation.  This means that when data is handled through transactions in the system the device is free to store code data as it deems appropriate fuel dispenser .  In a code generating application the code data can be stored in a simple database table. The device does not provide an application  level method to backup and restore codes in the system. Since this is tied tightly to the specifics of the device it is left up to the  manufacturer to develop a

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    fractiousness. The mood got worse two weeks ago, when Serbian television showed film of a Serb prisoner being executed by Croatian or Bosnian soldiers 11 years ago. The suggestion is that some 200 Serbs, mostly civilians, suffered the same fate. In another film a former Bosnian commander, Atif fuel dispenser Dudakovik, revered by Bosnia s Muslims (or Bosniaks), was heard ordering that Bosnian Serb villages be burned. Mr Dodik has filed charges against him. Later, a bomb damaged the tomb of Alija Izetbegovic, the Bosniaks wartime leader. At the end of the war in 1995, Bosnia was recognised as having two “entities� one dominated by Serbs and the other by Bosniaks and Croats. An international proconsul was appointed as the final a fuel dispenser rbiter of political life. One reason why Mr Dodik s latest comments have struck raw nerves is that this proconsul job, now held by Christian Schwarz-Schilling, a German diplomat, is being phased out. There are elections in the offing too polls will be held across Bosnia on October 1st. In his basketball club near Banja Luka, the Bosnian Serb capital, Mr Dodik does not deny that he is chasing Serb votes. He sticks to his demand for the right to a referendum, but adds that he “cannot see any reason to create a future outside of Bosnia.�Today his Republika Srpska is under pressure to cede powers to the central government in Sarajevo. He notes that, if Kosovo s Albanians win independence, “they will gain everything, while the Republika Srpska loses everything. This would be an amazing case of double standards.� In Sarajevo, Senad Pecanin, editor of Dani, a magazine, frets that Bosnians are arguing about things that led to war—and not more immediat fuel dispenser e issues, such as corruption and jobs. Senad Slatina, a political analyst, agrees, adding that “the Republika Srpska can t declare independence without war. Dodik knows this but does not say it. He is a manipulator.�Mr Dodik retorts that it is unfair to criticise him when Bosniak politicians such as Haris Silajdz