POPPUMP Namibia Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Namibia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

F-GB6Q FUEL DISPENSER

F-GB6Q

F-GB6Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :350kg

Dimension(L×W×H): 1860*660*2190(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 17

products links

links

technical archives

    mp will decrease and overflow valve cut down flowage passed. When need to decrease flow rate, one will reduce openness of fuel dispenser nozzle so as to increase the outlet pressure of pump. In that case, openness of valve and returned oil increase due to overflow valve work on spring, the outlet flowage of fuel dispenser is lessened. When the pressure of hydraulic system in fuel dispenser is suddenly increased due to some cause, overflow valve overcome spring strength under high pressure, raise openness and returned oil flowage to reduce pump pressure and protect the hydraulic system. Clockwise turn adjusting bolt of overflow valve given the openness of nozzle is unchanged the flux of fuel dispenser will be increased; anticlockwise turn decrease flux. Performance of vane pump Suction capacity Like other pump the good performance of vane pump should has high suction capacity, excellent stability with less vibration, small transitional volume, low noise, nice reliability and maintainable. These traits depend upon rational structure design, right selection of material and manufacturing level. User’s correct usage and maintenance is very important as well. Vane pump suction capacity mainly lies in the two aspects: suction distance and avoidance of air pocket. Diagram 2-5 is about pump, explaining pump suction distance. Suction distance fuel dispenser refers to fuel dispenser’s capacity to suck oil from a certain vertical and horizontal distance, often meaning vertical distance. Keeping suction distance a definite vacuum pressure in pump inlet is prerequisite. When the oil level is high or low in tank pump inlet vacuum pressure is often high. Under such high pressure, overflow valve overcome spring strength increase openness and returned oil. fuel dispenser Due to the pressure returned oil in other penetrative section is also increased, the filling flux is cut down consequently. The outlet flux of fuel dispenser becomes zero when returned oil reaches a certain volume. Therefore, when the returned oil of overflow valve and other penetrative s

technical specification

    ate of the CWP. Please see the Car   Washing Point State Diagram for details of the individual   fuel dispenser states (chapter 2.1 of this document).   An unsolicited message (DataID 100) is generated by the   CWP for each change in the CWP state. When a CD tries   to change the state of a CWP when a state change is not   allowed then the CWP should reject the attempt with   MS_ACK 05 and DATA_ACK 03 (command refused in   this state).   21 bin64 R(6-7) O   CWPActiveElements   (15H)   Used to indicate element(s) of the CWP are active.   This data field would be updated by the CWP as it is   progressing through the wash elements.  Version 1.33 IFSF - STANDARD FORECOURT PROTOCOL September 2005   CAR WASH SPECIFICATION   Page: 42 of 65   22 bin16 R(1-9) M   AssignControlID   (16H) W(2-4)   Used fuel dispenser to indicate if and to whom the CWP has been   assigned. Only an authorisation coming from this   controller is accepted.   A Logical Node Address (LNA) is used for the   AssignControlID. The LNA is specified by 2 bytes (S =   Subnet N = Node). For details see document Part II   Communication Specification.   fuel dispenser 0 0 = not assigned   X Y = Controller Device that assigned the CWP (X =   Subnet Y = Node)   255 255 = CWP running in stand alone mode.   A CWP can o

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    n s land mass, an insurgency is simmering. In the never-tamed tribal areas bordering Afghanistan, the army is waging war fuel dispenser against Islamic fanatics. Nor is that all. Pakistan has nuclear weapons, and until recently was selling their secrets to North Korea, Iran, Libya and maybe others. During its most recent big stand-off with India, in 2002, Pakistan gave warning that, if attacked, it might nuke its neighbour. Mostly, however, in Kashmir, Afghanistan and its own unruly cities, Pakistan has used, and perhaps still uses, Islamist militants to fight its wars—including the confused lot it is fighting, at America s request, in the tribal areas. Several thousand armed extremists are swilling around the country. Thousands more youths are being prepared for holy war at radical Islamic schools. Osama bin Laden is widely believed to be in Pakistan. When General Musharraf launched his coup in 1999, it was not—or not principally—to clean up this mess. Instead, he wanted to save his career, having been sacked as army chief by Nawaz Sharif, then the prime minister. Mr Sharif had tried to subordinate the army—which in Pakistan is a parallel state, some say the only state—to civilian rule. But however unpromising his start, General Musharraf has generally proved much better at running the country than either Mr Sharif or Benazir Bhutt fuel dispenser o, Pakistan s other elected leader in recent times. He also remains more popular than either of them, though his support has recently been slipping. General Musharraf s shopping list General Musharraf inherited an economy in crisis. Shackled by sanctions and parched of capital, Pakistan had defaulted on foreign debts. He ensured that the country did what the IMF told it to do, and en fuel dispenser ded the crisis. Thanks partly to continued fiscal prudence and some sensible reforms, Pakistan has notched up average growth of 7% over the past three years, about the same as India. It also helped that after the attacks on America on September 11th 2001, General Musharraf decid