K-GA44 FUEL DISPENSER

K-GA44 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset Function :Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose 4.5m

Weight 280kg

Dimension(L×W×H) : 1540*690*2210(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

erance not exceed ±0.3%，repeated measuring no more than 0.15% as fuel dispenser is operated within the flow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maximum flow-rate within basic tolerance. The ratio of maximum flow rate to minimum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conduct fuel dispenser ed at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimum measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage testing The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performan fuel dispenser ce testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get right value of measurement. Volume fluctuation testing The test is aimed at defining the hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always fuel dispenser

86 E 1　　 81　　Note 1: present if transaction succeeds　　Note 2: present if transaction fails　　Note 3: present if information is applicable to the application　　Note 4: Cf. Securement of transaction information page 55.　　All rights reserved ? Pri fuel dispenser nted on 281004 10:10 5598　　 Ref : NT1118R1　　 MPA V5.2: TECHNICAL SPECIFICATIONS　　 Nb Pages : 98 + 0 PJ　　 for the ATM-MONETICS LINK　　 Date :　　POS Department　　 11.7.10. Message 10 (Transaction recording reply)　　 Ref. Data Tag Format L (V) Note　　 D5006 Status of transaction recording DF D3 8E E 1　　 D5007 Reason for recording refusal DF D3 8F E 1　　 D5008 Additional transaction reference DF D3 90 BCD3 3　　 D10017 Bearer ticket FF E7 21 fuel dispenser OC 1　　 5　　Note 1: if the field is absent there is no printout.　　All rights reserved ? Printed on 281004 10:10 5698　　 Ref : NT1118R1　　 MPA V5.2: TECHNICAL SPECIFICATIONS　　 fuel dispenser

ot be behind the move; he publicly blocked another proposed law, which would have given him the power to dissolve parliament. Nor does he seem to be encouraging the anti-corruption witch-hunt that began after the election his attorney-general announced a series of probes (none new), the prime minister s office shows sudden interest in foreign-designed anti- corruption ideas it had ignored before, and lists of targets for prosecution are ci fuel dispenser rculating in the PA. In fact, such moves seem to be coming not from the top but from officials acting alone, perhaps trying to ingratiate themselves with the incoming government. Hamas has attacked Mr Abbas for appointing Fatah officials to key civil-service posts, but it has been quietly holding talks with top civil servants to ensure their co-operation. “Everything�? says a foreign contractor who works with the PA, “is going green”—the colour of Hamas. © 2006 . Iraq Please try harder to be inclusive Feb 16th 2006 | DUBAI From The Economist print edition Can Dr Ibrahim al-Jaafari do better as prime minister this time round? AP FEW Iraqis are inspired by their current and likely future prime minister, Ibrahim al-Jaafari. Yet last week he won, by a single vote, the nomination of the ruling Shia-led alliance to head Iraq s government for another four years. In public he is rather dull. He tends t fuel dispenser o mumble. He prefers to let his coalition partners make distinct statements of policy. In private, many politicians find him passive but stubborn a frustrating man with whom to cut a deal. Sunni Arabs, who make up only a fifth of the population but the bulk of the insurgents, tend to write his Dawa (Call) party off as just another bunch of would-be theocrats. The Kurds dislike him because they say his government broke a promise to resettle Kurdish refugees back in the disputed Kirkuk province whom Saddam Hu fuel dispenser