K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

bolt is first step as measurement accuracy beyond scope. If it doesn’t work, consider other solutions. Some oil is easily full of colloid due to not in accordance with national standard or exposing to air in long storage. fuel dispenser Much colloid is deposited on the relevant frictional surface of measurement transducer (surface of p fuel dispenser iston and cylinder) make moving parts difficult to work so as to increase pressure and affect measuring accuracy. The inlet pressure of measurement transducer usually is little under small flow rate. However, piston resistance is increased due to extensive colloid, even easily appear the phenomenon of refueling without measurement related. In this case, fuel dispenser delivery more oil than flow measured. Oil full of colloid is also affected the normal operation of vehicle motor. The cardinal solution to this problem is to control the quality and storage time of oil. Carefully clean the colloid on relative frictional surface of measurement transducer as occur the problem, and especially pay much attention to the friction surface so as not to damage mechanical parts. 1-Outlet elbow 2-End cover 3-Piston 4-Frame 5-Connecting sheet 6-Lower connecting rod 7-Upper connecting rod 8-Cylinder bushing 9-Adjusting bolt 10-Cap nut 11-Regualting piston 12-Driving elbow 13-Brass bushing 14-O-ring 15-Output shaft 16-Nylon wheel Diagram 2-19: Structural drawing of another kind of metal piston measurement transducer Accuracy decline and leakage caused by mechanical failure. The extensive mechanical abrasion of relevant friction surface of measurement transducer is main reason of causing accuracy beyond limitation. These parts abrasion result in accuracy decline, such as connecting board, bushing, small brass bushing used as adjusting piston, regulative piston, nylon wheel, etc. The O-rings between connecting rod and piston and on driving elbow tend to expansion to affect accuracy. Generally, disassemble and inspect all components, problem will be solved by changing extensive abrasion or damaged parts. fuel dispenser

s work: the protocol　　should instead leave flexibility as ISO8583 does in the on-line standard protocol to the Host.　　The Interoperability specification involve then the testability of the applications so the interoperab fuel dispenser ility is possible to　　be tested only in the phase of system integration.　　There is a basic list fuel dispenser of actions to achieve a minimum interoperability testing:　　 Define the topology of the implementation　　 Define the CardServiceRequest to be managed　　 Define the ServiceRequest to be managed　　 Define the DeviceRequest to be managed POS-EPS and for which device　　 Define the DeviceRequest to be managed POS-EPS and for which device　　 For each of the defined Request populate the message data clearly stating which of the optional fields are to be　　 populated under which condition　　 Do the same for the responses　　 For fields that involve definition of acceptable values define the values to be used　　Of course behind this the true interoperability is the application process handled by the POS and by the EPS that　　must match.　　All the messages to the Pin-pad depend on the interface implemented between the Pin-pad and the EPS　　application thus they cannot be included in an overall interoperability test: this test will operate between the POS　　and the EPS applications considering the Pin-pad as part of the EPS application.　　Example Receipt　　The receipt is provided by EPS and by definition it is the Eft part only. Both must handle the receipt in a coherent　　manner as in the example below:　　Receipt is composed of the fundamental parts:　　 1. Eft Payment receipt copy for cashier EPS　　 2. Sale (fiscal in most of cases) receipt POS　　 3. Eft Payment receipt EPS　　 4. Loyalty receipt (awarding or redemption) EPS　　 5. CourtesyOther message fuel dispenser

efore it is adopted. But even a slight hardening of ASEAN s stance might embarrass Myanmar into making modest concessions. If ASEAN raises no objections to a Security Council referral, this will increase the chances of fuel dispenser America getting the nine votes (out of 15) it needs to put a resolution on the council s agenda. If fuel dispenser the resolution omits to mention sanctions and simply calls on the regime to accept political dialogue, allow greater access for humanitarian aid and so on, veto-wielding China and Russia might be persuaded to abstain. The Burmese regime dislikes being treated as a pariah state, and it can be prodded, reluctantly, into reacting to outside pressure. A recent threat by the UN s International Labour Organisation to refer Myanmar to the International Court of Justice prompted the regime to release two people locked up for campaigning against the widespread use of forced labour in the country. Threatened with being the subject of a Security Council debate, and a bit more cold-shouldering in ASEAN, the regime might possibly be badgered into restarting a tarnished and stalled initiative to produce a new constitution—the first stage of its promised road map to democracy—and into setting a date for it to be completed by. The opposition boycotted the constitution-writing body because its conditions (including Miss Suu Kyi s release) had not been met. The body is therefore certain to guarantee the army a strong role in the country, even if the ruling generals shed their uniforms and stay in power. One faint cause for hope is that the clauses on how to amend the constitution have yet to be written. Sustained diplomatic pressure might persuade the generals to allow some scope for further changes after the constitution is adopted� maybe, one distant day, setting in train a genuine move towards civilian rule. © 2006 .  About sponsorship North Korea Will he, won t he? Aug 31st 2006 From The Economist pri fuel dispenser