POPPUMP Namibia Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Namibia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

P-G22Q FUEL DISPENSER

P-G22Q

P-G22Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 235kg

Dimension(L×W×H) :1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 44 20ft: 22

products links

links

technical archives

    ystem. The valve core of overflow valve moves outward so that all pressured oil flood past the outlet of overflow valve and flow into suction chamber, realizing oil circulation in pump. The hydraulic system pressure is adjusted through increasing or reducing spring pressure. The mos fuel dispenser t fragile section in hydraulic system will be damaged as the pressure reaching a certain value without a overflow valve to control pressure. The spring pressure will be increased through to add the thickness of pre-pressure ring (20a). The pressure to open overflow valve and the delivery volume of fuel dispenser are also increased. Vice versa, as the thickness is reduced. working principle of inner-cycloidal gear pump Inner-cycloidal gear pump consists of a pair of inner and outer gear joggled interactively. Inner gear is driver, called as inner rotor; outer gear is driven called as outer rotor. The figure of inner rotor is round arc curve, but the joint section of inner rotor figure and fuel dispenser outer rotor curve is exterior cycloidal. Outer rotor exceeds one tooth than inner rotor. Sever sealed working cub fuel dispenser age are formed between teeth of inner and outer rotor. Inner rotor brings outer rotor rotation anticlockwise. At that time the cubage gradually increase, formed in suction chamber by the tooth top of inner rotor and gear vale of outer rotor. As pressured oil suck into discharge chamber the cubage formed by inner and outer gear is reducing, impelling oil out of pump. Continual suction and discharge result from the unceasing rotation of out gear driven by inner gear. 1-Vapor separator frame 2-Filter bracket 3-Filter 4-Filter bracket 5\6-O-ring 7-Gear group 8-Axis 9-Key 10-Cover 11-Oil seal 11a-Bolt 12-Screw 13-Elastic washer 14-Thread pipe 15-Joiter 16-Inlet filter 17-Stainer cover 18-Seal ring 19-Voverflow valve cover 20-Spring 20a-Preloading ring 21-Voverflow valve 22-Overflow valve 23-Filter with valve 23a-Spring 24-Exhaust pipe jointer 25-Screw 26-Outlet pipe 27-O-ring 28-Pump body Diagram 2-9: One kind of inner cycloida

technical specification

    - Must set the Hi_Level_Setpoint to the High Level   Setpoint limit that is hard coded in their program.   When a master resetcoldstart occurs on the TP device   the TP should reset this data_Id to its default value.   17 fuel dispenser Level R(1-3) O2   Lo_Level_Setpoint   (11H) W(3)   The Lo_Level_Setpoint is used to specify the level of the   low product alarm. This alarm is activated when the   product level is lower than the Lo_Level_Setpoint.   Please note that TP s that do not permit the   Lo_Level_Setpoint to be changed remotely should:   - Reject any write attempts with a Data_ACK value of 2   (Read OnlyNot Writable).   - Must fuel dispenser set the Lo_Level_Setpoint to the Low Level   Setpoint limit that is hard coded in their program. fuel dispenser    When a master resetcoldstart occurs on the TP device   the TP should reset this data_Id to its default value.   18 Level R(1-3) O2   LoLo_Level_Setpoint   (12H) W(3)   The LoLo_Level_Setpoint is used to specify the level of   the low-low product alarm. This alarm is activated when   the product level is lower than the LoLo_Level_Setpoint.   Please note that TP s that do not permit the   LoLo_Level_Setpoint to be changed remotely should:   - Reject any write attempts with a Data_ACK value of 2   (Read OnlyNot Writable).   - Must set the LoLo_Level_Set

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    and the blood between them was said to be bad. The evidence suggests al-Qaeda is still well organised, and offers direction, resources and a stamp of approval from the charismatic leader to an array of jihadists. A harder question is what al-Qaeda would amount to without Mr bin fuel dispenser Laden. It would probably be dominated by the Egyptian jihadists round Mr Zawahiri. But whether he could hold it together is unclear. That might anyway be unnecessary, given the growing propensity for young Europeans to join the global jihad. His part in creating this seems sure to be Mr bin Laden s grisly legacy. © 2006 . About sponsorship The mid-term elections Shifting pocketbook politics Aug 31st 2006 | WASHINGTON, DC From The Economist print edition AP How much will the economy matter in November s mid-term fuel dispenser elections, and which party will gain from it? WITH giant barbecues, giant sales and giant traffic jams, Americ fuel dispenser ans will bid summer farewell this weekend. Politicians across the country will kiss babies and make stump speeches from straw bales. Labour Day, officially a holiday to celebrate America s workers, marks the unofficial start of campaigning for the mid-term elections on November 7th. That kick-off date may well be apt. After elections in 2002 and 2004 that were dominated by terrorism and national security, the economy, and particularly workers well-being, looks likely to play a bigger role this year. And both parties reckon they can benefit by that. The Republicans 2006 strategy has long been to divert voters attention from the Iraq mess by highlighting the economy s strong overall performance. Unemployment is low; productivity has been buoyant; output growth has been strong. The economy is in better shape than in 2004, argue Republican pollsters. It should therefore help their camp. Democrats disagree. Growth may ha