S-GA4Q FUEL DISPENSER

S-GA4Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose 4.5m

Weight 305kg.

Dimension(L×W×H): 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

e, low cost and convenient maintenance, vane pump is widely adopted in many industrial areas. Most of domestic manufacturer of fuel dispenser install vane pump as component. Vane pump includes ration pump and variable pump, the former is mounted in fuel dispenser. At recent years, the domestic noise research for vane pump has been achieved good progress conducted by fuel dispenser manufac fuel dispenser turer. The noise of vane pump has remarkably been downed, reaching to less than 70 d B. it is introduced as followed: 1: Cap nut 2: Adjusting bolt 3: Spring seat 4: Spring 5: Blade 6: Rotor 7: Plug 8: Spring flake 9: Axis 10: Frame 11: Overflow valve 12: Valve seat Diagram 2-1: Vane pump structure drawing Structure and working principle of vane pump The Diagram 2-1 and 2-2 illustrate one kind of vane pump about its structure and tridimensional exploded drawing. This kind of pump prevails in domestic fuel dispenser market. Its structure, principle and maintenance will be introduced. Vane pump consists of overflow valve and vane pump illustrated in Diagram 2-1. Overflow valve is installed on the upper of body, including overflow valve seat, vale core, spring, spring bracket, jointer, adjusting bolt and cap nut. The lower body is pump section composed of gliding bearing, rotor subassembly, blade set, spring flat and pump cover with gliding bearing. The right side of diagram is inlet, the opposite outlet. The working principle, performance and common troubleshooting of vane pump and overflow valve will be presented respectively. Vane pump sec fuel dispenser tion The chamber in where rotor installed is pump chamber, its installing procedure showed in diagram 2-3. A centrifugal degree e between the center of chamber and rotor is illustrated in diagram. There are upper and down seal area, high pressure and low pressure transitional area, divided by the center of rotor. The angular degree in sealing area is larger than that of degree formed by the neared two vanes so as to prevent oil flow between low and high pressure areas. 1-Cap fuel dispenser

Un change　　 communication　　 fuel dispenser identification automate + nombre et　　Etablissement logique de communication　　 r f rence des applicatifs pr sents　　 91 R ponse: nombre dapplications +　　 liste (application r f rence canal)　　 92 Demande tat contexte pour　　 Synchronisation　　 une application: r f rence applicatif　　 fuel dispenser applicatifs　　 applications　　 fuel dispenser

Russia, involving a shady gas- trading intermediary, “stinks to high heaven.�(Ms Tymoshenko opposes it, though only, it is whispered, because her preferred intermediary lost out; she herself insists that she is opposed in principle to the use of middlemen.) For all that, and as much in spite of its politicians as because of them, last week s vote demonstrated that Mr Yushchenko has, fuel dispenser on balance, steered Ukraine in the right direction. © 2006 .  About sponsorship Charlemagne A weakening magnet Mar 30th 2006 From The Economist print edition In a multipolar neighbourhood, the European Union is losing its will to attract THE latest news from Ukraine and Belarus is certainly a setback for the European Union. Perhaps the strongish electoral showing by Ukraine s pro-Russian camp is not, in the end, a disaster; and even the despotic, vote-rigging President Alyaksandr Lukashenka of Belarus will not be there for ever. But the situation is serious enough to prompt the EU to look again at its so-called “neighbourhood policy� and be more honest about the costs of enlargement fatigue. It is tempting to say the outcome of the votes had nothing to do with the EU. Mr Lukashenka has falsified elections before. It is hardly the EU s fault that he rigged another one. In Ukraine, the pro-Russian party that topped the parliamentary poll is not opposed to the EU; its success had more to do with disenchantment with national leaders, not with the EU itself. B fuel dispenser ut the union can hardly take credit for its role in the orange revolution (when its representatives helped avert violence) and then act as if nothing had changed now that a pro-EU president has seen his party trounced. Moreover, the eastern border is not the only post-communist place where the EU seems to be losing friends and not influencing people. Commission officials are edgy about the Balkans, which face a critical six months in which the future of Serbia, Montene fuel dispenser