POPPUMP Namibia Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Namibia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U102-C Gear Pump

U102-C

U102-C Gear Pump

Materials:

Body: Cast lron (Spray-Painted)

seals: Buna-N

Technical Specifications:

Power:750-1000W

Flow Rate:45~55L/min

Rotary speed :800~1000rpm

Noise:<=68dB

Vacuum :>=0.054Mpa

Pressure Drop:0.12-0.25Mpa

Air separation ability:20%

Features :

Positive displacement,self priming,internal adjustable bypass valve

Designed for quiet, vibration-free operation.Reusable suction

strainer filter and reverse check valve inside adapted

Check and relief valve inside adapted

100% tested before Ex-Factory

Package:

Product ID Net Weight Cross Weight Dimension

U102-C 32kg/case of 1 32.5kg/case of 1 27×35× 42cm/case of 1

products links

links

technical archives

    tion pin 15-O-ring Diagram 2-27: Structure of general nozzle 1-Spout 2-Nut 3-Hex nut 4-Gasket 5-Valve washer 6-Gasket 7-Washer 8-O-ring 9-Assistant valve 10-Spring 11-Guiding bar 12-Cap 13-Seal 14-Spring 15-Bolt 16-O-ring 17-Lockwasher 18-Spring seat 19-Gasket 20-Valve body 21-Nozzle body 22-O-ring 23-Gland nut 24-Ejection pin 25-Supporting gasket 26-Pin axis 27-Suppor plate 28-Switch handle 29-Pin axis 30-Copper sleeve 31-Valve seat Diagram 2-28: Exploded drawing of general nozzle 1.2 Structure and function of key components Main valve unit Illustrated in Diagram 2-29, main valve consists of valve body, gasket, locking washer, spring seat, which is used to switch on or off the delivery pipe pf nozzle. 1-Valve body 2-Gasket 3-Lockwahser 4-Screw 5-Spring seat 6-O-ring Diagram 2-29: Main valve unit Adjusting used for change the clearance between switcher and top level, which should be kept in 0.3~ 0.5mm. Locking washer is to prevent bolt loose. Vice valve Vice valve will be closed as main valve switch off, showed in Diagram 2-30. As for fuel dispenser with presetting function, main valve don’t close after presetting filling, vice valve is closed to ensure accuracy and field clean. 1-Spring 2-Valve body 3-Guiding bar 4-Gasket 5-Valve washer Diagram 2-30: Vice valve Top level and switch h fuel dispenser andle. Used for open or close of main valve, changing openness so as to adjusting outlet flow rate. Locking nut To pressure O-ring in case of leakage Working principal As fuel dispenser start work, lift switch handle and open main valve, oil filled with chamber of main and side valve, oil discharge out of nozzle spout through pressured oil opening side valve. Usage and maintenance Nozzle is made of aluminum, which is carefully taken up and down, in case of being damaged. Regularly add greasy oil to nozzle to facilitate oper fuel dispenser ation; regularly inspect O-ring, replacing damaged one. There is a regulative device between top level and switch handle, which is used to adjust clearance. Disconnect p fuel dispenser

technical specification

    a read-only Data_ID then   the response is an acknowledge message with an MS_Ack=5 but with a   Data_Ack value of 2. Here is an example of a write to Data_ID=1 in the   communication services database (the communication protocol version which   is read only). The actual value of the data (Data_El) is irrelevant but in the   example a Bcd12 value of 000000000185 and token value of 06 is used.  FP2_1.90 IFSF STANDARD FORECOURT PROTOCOL February 2006   COMMUNICATION SPECIFICATION   Page: 44   1801 0208 02 48 000A 0100 01 06 000000000185   0208 1801 00 E8 0005 0100 05 01 02   NOTE: An Unsolicited Status_message has a Data_ID of 100 (64H) in all   IFSF application specifications. This Data_ID is unique in that it can be   neither read or written by a CD in any state. Therefore it obeys the rules given   above in 3 (for Read) and 4 (for Write).   Example Read Status_Message of FP1 in Dispenser:   0101 0208 00 08 0003 0121 64   0208 0101 00 28 0004 0121 6 fuel dispenser 4 00 Data does not exist I.e. it has no value   Example Write Status_Message   1801 0208 00 48 000A 0101 64 06 000000000185   0208 1801 00 E8 0005 0101 05 64 02 Data cannot be written in this state   5. To recap at this point for both read and write we have now established that the   database address is valid the Data_ID is valid and we are in a valid state for   the read or write operation we wish to perform. fuel dispenser For a read message there is   nothing else to do but to receive the answer. For a write message only the ne fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    ed to have responsibility for enforcing their own criminal justice. But all too often they had shown themselves unwilling or incapable of prosecuting the worst culprits, either because those responsible were still in power, or because they had taken refuge in other countries and were now out of reach. Hence the turn to international justice. In 1993, the UN s International Criminal Tribunal for ex-Yugoslavia (ICTY) in The Hague became the first international war-crimes tribunal to be set up since the Nuremberg and Tokyo trials after the second world war. It was followed a year later by the UN tribunal for Rwanda, based in Arusha, Tanzania. Like their post-war forebears, the two courts operate exclusively under international law and are staffed by foreign judges. Since then, five other war-crimes tribunals, all with more or less international input, have been—or are being—set up to deal with atrocities in Sierra Leone, Cambodia, Timor-Leste, Iraq and Afghanistan. Lebanon has now asked the UN for help in setting up a “tribunal of international character�to try the assassins of Rafik Hariri, the former Lebanese prime minister who was killed a year ago. What man can do to man The Special Court for Sierra Leone, set up jointly by the UN and the Sierra Leonean government in 2002, was the wor fuel dispenser ld s first “hybrid�court. Financed by voluntary contributions from UN members, it operates under international law but with a mixture of local and international judges. Based in Freetown, Sierra Leone s capital, it was also the first modern war-crimes tribunal to be based “in theatre�(ie, in the country where the crimes were committed). Desmond de Silva, the court s chief prosecutor, recounts his first visit to an amputee camp in the town four years ago “I saw a little girl with no arms saying to her mother ‘Mummy, when will my a fuel dispenser rms grow again?�Nearby was a baby suckling at his mother s breast neither had any arms. These were sights that said to me do something. This is evil fuel dispenser